Forklift bearings are different from ordinary ordinary bearings. They are better than ordinary bearings in terms of performance, bearing materials and performance. Industrial handling vehicles are widely used in ports, stations, airports, freight yards, factory workshops, warehouses, circulation centers and distribution centers, etc., and can enter cabins, carriages and containers for loading and unloading and handling of palletized goods.
It is an indispensable equipment for pallet transportation and container transportation. Forklifts play a very important role in the company’s logistics system and are the main force in material handling equipment. It is widely used in various sectors of the national economy such as stations, ports, airports, factories, warehouses, etc. It is an efficient equipment for mechanized loading and unloading, stacking and short-distance transportation. Self-propelled forklifts appeared in 1917. During the Second World War, forklifts were developed. China began manufacturing forklifts in the early 1950s. Especially with the rapid development of China’s economy, most of the company’s material handling has been separated from the original manual handling, and replaced by forklift-based mechanized handling. Therefore, in the past few years, the demand for China’s forklift market has grown at a double-digit rate every year.
For forklift bearing lubrication, first open the cover and observe the wear of the release bearing. If it is confirmed that the bearing is not damaged or the wear does not exceed the limit, remove the clutch pedal and adjust the ejector rod to return the release bearing and its seat to the final position. Use a sharp-nosed grease gun to fill the hole of the bearing seat with grease until oil overflows from the bearing, then turn the bearing slightly, fill the oil again, repeat the above work until a little butter overflows around the bearing, and then rotate the bearing to observe the amount of oil , If you feel resistance to the bearing rotation, it proves that the bearing has been filled with butter. Then remove a small amount of butter overflowing from all parts of the separation bearing seat, and readjust the position of the separation bearing.